Acier inoxydable 300 Series Grades

ALLIAGE / UNS	DESCRIPTION	C MAX	NI	CR	MN	AUTRE	DENSITÉ
301 S30100	Chromium nickel steel capable of attaining high tensile strength and ductility by moderate or severe cold working.	0.15	6.0-8.0	16.0-18.0	18.0 2.0 Max	P .045 Max S .03 Max Si 1.0 Max	0.29
301LN S30153	301LN is a higher nitrogen content version of 301L to compensate for the lower carbon.	0.03	6.0-8.0	16.5-18.5	2.0 Max	P .045 Max S .03 Max S 1.0 Max	0.29
303 S30300	Free machining grade (sulfur added) with good machinability, corrosion resistance and strength.	0.15	8.0-10.0	17.0-19.0	2.0 Max	P .20 Max Si 1.0 Max S .15 Min	0.282
304 S30400	Low carbon chromium nickel stainless and heat resisting steel somewhat superior to Type 302 in corrosion resistance.	0.08	8.0-10.5	18.0-20.0	2.0 Max	P .045 Max S .03 Max Si 1.0 Max	0.29
304H S30409	Controlled carbon grade of 304 for increased strength at operating temperatures above 800 degrees Fahrenheit.	.04-1.0	8.0-10.5	18.0-20.0	2.0 Max	P .04 Max Si 1.0 Max S .03 Max	.285
304L S30403	Very low carbon chromium nickel steel with general corrosion resistance similar to Type 304 but with superior resistance to intergranular corrosion following welding or stress relieving.	.03	8.0-12.0	18.0-20.0	2.0 Max	P .045 Max S .03 Max Si 1.0 Max	.29
309 S30900	High corrosion-resistant, chromium nickel grade with carbon limited to .08	.08	12.0-15.0	22.0-24.0	2.0 Max	P .045 Max S .03 Max Si 1.0 Max	.29
309S S30908	Controlled carbon version of 309. 309S maintains corrosion resistance at higher operating temperatures.	.08	12.0-15.0	22.0-24.0	2.0 Max	P .045 Max Si 1.0 Max S .03 Max	.29
310 S31000	Similar to 309 with higher resistance to corrosion and oxidation at elevated temperatures.	.25	19.0-22.0	24.0-26.0	2.0 Max	P .045 Max S .03 Max Si 1.50 Max	.29
310S S31008	Maintains good strength and corrosion resistance at higher operating temperatures.	.08	19.0-22	24.00-26.00	2.0 Max	P .045 Max S .030 Max Si 1.50 Max	.29
316 S31600	Chromium nickel stainless and heat resisting steel with superior corrosion resistance to other chromium nickel steels when exposed to many types of chemical corrodents; superior creep strength at elevated temperatures.	.08	10.0-14.0	16.0-18.0	2.0 Max	P .045 Max S .03 Max Si 1.0 Max Mo 2.0-3.0	.29
316L S31603	Low carbon chromium nickel stainless steel with general corrosion resistance similar to Type 316 but with superior resistance to intergranular corrosion following welding or relieving. It is recommended for use in parts which are fabricated by welding and cannot be subsequently annealed.	.03	10.0-14.0	16.0-18.0	2.0 Max	P .045 Max S .03 Max Si 1.0 Max Mo 2.0-3.0	.29
321 S32100	Chromium nickel steel containing titanium. Recommended for parts fabricated by welding which cannot be subsequently annealed. Also recommended for parts to be used at temperatures between 800°F and 1850°F.	.08	9.0-12.0	17.0-19.0	2.0 Max	P .045 Max S .03 Max Si 1.0 Max Ti 5xC Min	.29

Filtrer les produits

• Nuance
• Degré de trempe
• Finition

Choisir la nuance

304L ACIER INOXYDABLE 316L ACIER INOXYDABLE 304 ACIER INOXYDABLE 301 ACIER INOXYDABLE 309 ACIER INOXYDABLE 310S ACIER INOXYDABLE 303 ACIER INOXYDABLE 316 ACIER INOXYDABLE 304H ACIER INOXYDABLE 321 ACIER INOXYDABLE 310 ACIER INOXYDABLE

Rechercher la nuance

Sélectionnez le Temper

NOT APPLICABLE

Rechercher Temper

Sélectionnez le Fini

HRAP MILL FINISH FH 2B ANN DDQ SLIT & EDGE X4 600 GRIT BLEND S CD SEAMLESS WELDED 180 GRIT CHECKER HRAP 220 GRIT ST CG BQ RD HRT BOM RT HRA MF SQ CDX FULL HARD HALF HARD 2D 1/4 HARD BRITE ANNEALED 2B STUCCO EMBOSSED BLACK PREBUFF X10 X8 XLB PERF XL BUFF SUEDE XL4 240 GRIT X4 2 SIDES XL7 XLBH XLBM BLEND S ANNEALED SUPREME 8 22O GRIT 80 GRIT EXP LX XRA X4RA10 XP HH EQ SLG X5 GRIT XB XP EXPANDED L EXP X4RA20 X4RA25 LAS FUS TDL TIG 320 GRIT 316 BLEND "S

Rechercher le fini

Enlever les filtres Appliquer les filtres

Inventaire d' Acier inoxydable 300 Series

#	Description	Nuance	Degré de trempe	Finition	Dimensions	Ajouter au panier
1	Canal en acier inoxydable 316 HRAP 6" x 3" x 3/8" x 20'	316L	N/A	Mill Finish	316 HRAP 6" x 3" x 3/8" x 20'	Ajouter au panier
2	Canal en acier inoxydable HRAP 10" x 2.6" x .436" x 20'	316L	N/A	Mill Finish	HRAP 10" x 2.6" x .436" x 20'	Ajouter au panier
3	Bobine en acier inoxydable .015 x .65" x Coil	301	–	FH	.015 x .65" x Coil	Ajouter au panier
4	Bobine en acier inoxydable 18ga x 3.745" x Coil	304	–	2B	18ga x 3.745" x Coil	Ajouter au panier
5	Bobine en acier inoxydable 18ga x 3.745" x Coil	304L	–	2B	18ga x 3.745" x Coil	Ajouter au panier
6	Bobine en acier inoxydable 7ga x 3" x Coil	304L	–	2B	7ga x 3" x Coil	Ajouter au panier
7	Bobine en acier inoxydable 7ga x 3.375" x Coil	304	–	2B	7ga x 3.375" x Coil	Ajouter au panier
8	Bobine en acier inoxydable 7ga x 3-3/8" x Coil	304L	–	2B	7ga x 3-3/8" x Coil	Ajouter au panier
9	Bobine en acier inoxydable 7ga x 3.500" x Coil	304	–	2B	7ga x 3.500" x Coil	Ajouter au panier
10	Bobine en acier inoxydable 7ga x 3-1/2" x Coil	304L	–	2B	7ga x 3-1/2" x Coil	Ajouter au panier
11	Bobine en acier inoxydable .012" x 1.9353" x Coil	304	–	ANN	.012" x 1.9353" x Coil	Ajouter au panier
12	Bobine en acier inoxydable .083 x 9-1/2" x Coil	304	–	DDQ	.083 x 9-1/2" x Coil	Ajouter au panier
13	Barre plate en acier inoxydable S/E 1/8" x 1/2" x 12-14'	304	–	Slit & Edge	S/E 1/8" x 1/2" x 12-14'	Ajouter au panier
14	Barre plate en acier inoxydable S/E 1/8" x 3/4" x 12-14'	304	–	Slit & Edge	S/E 1/8" x 3/4" x 12-14'	Ajouter au panier
15	Barre plate en acier inoxydable 1/8" x 3/4" x 12-14'	304	–	X4	1/8" x 3/4" x 12-14'	Ajouter au panier

MONTR

25 par page 50 par page 100 par page

Situées stratégiquement en Ontario et au Québec, nos infrastructures représentent plus de 150,000 pieds carrés (+ 14,000 m2) en entrepôts et lignes de production, nous permettant de servir fièrement les fabricants au Canada et aux États-Unis.

EN APPRENDRE PLUS

Délais rapides de réponse et de livraison

Métallurgistes et Spécialistes en produits sur place

Serving Canada and the US Metal Needs